petermerle wrote:Bracket required A6179950432
Peter
unfortunately, that's the only piece I have in common.
the 300TD bracket setup is completely different
Hoses were attached at two locations -
to the A/C mount which is a huge casting that had to be removed to clear the steering system
and to a bracket that positioned the hoses right where the G engine mount arm goes.
But in Dai's picture - I get an idea for one of those locations. I might be able to chop the existing bracket to bolt to the oil pan flange. I'll have to look at the 110 engine hose brackets - there might be something usable there too.