Gwanabe wrote:Can you please tell us how you came up with 0.06 ohm resistor value? Thanks for sharing this with us.
Turn signals: Unfortunately, no one makes a LED-ready version of the W463 flasher relay. So, here is how to fix your own:
Open the flasher relay. Unsolder the current sense resistor (0.02 ohm) and replace with a 0.06 ohm resistor. The modified relay will work both LED and incandescent bulbs in any combination. Tape the old resistor onto the relay just in case you want to go back. Side benefit: your turn signal switch will last forever.
Users browsing this forum: No registered users and 2 guests