Home   Forum   Classifieds   Tech/DIY   News   Articles   Chat   Contact Us

606 throttle linkage question

Forum rules
Welcome to the Tech/DIY information archive. This area of the board is for reference purposes, please direct general tech discussion to the G Wagen Technical Forum.
G Nome
Posts: 7766

Re: 606 throttle linkage question

Post#21 » Tue Sep 08, 2015 8:36 pm

She has good taste...and I don't mean you.

Some are showing now for me.
Kent
If you need help...I usually have extra zip ties and duct tape.

User avatar
inkblotz
Posts: 8202

Re: 606 throttle linkage question

Post#22 » Wed Sep 09, 2015 1:45 am

What I see.
Attachments
Screen Shot 2015-09-09 at 5.44.44 AM.png

sprinter 711651

Re: 606 throttle linkage question

Post#23 » Wed Sep 09, 2015 2:29 am

I see them all.
Some good pics there Vadim, nice to know, thanks!

Cheers Scott

User avatar
vadimivanovich
Posts: 8643

Re: 606 throttle linkage question

Post#24 » Wed Sep 09, 2015 7:13 am

My pics are all linked from a google photo album... something must be awry there...
"The way you think is the way you live"

Mcfly
Posts: 334

Re: 606 throttle linkage question

Post#25 » Wed Sep 09, 2015 3:18 pm

Vadim, the picture of the 250gd wolf linkage is what I have envisioned. Do you or anyone have a part number for this? I am struggling to find it in the EPC

Marty
2000 Europa G500
1986 280ge 606STD

User avatar
vadimivanovich
Posts: 8643

Re: 606 throttle linkage question

Post#26 » Thu Sep 10, 2015 8:37 am

I might be able to find it - I'll have a look tonight
"The way you think is the way you live"

sprinter 711651

Re: 606 throttle linkage question

Post#27 » Thu Sep 10, 2015 10:51 am

Hi Marty

I've attached a picture of the back of an injector pump. You can see that the fuel lever has two connection balls on it, some have 3. The left and longest arm is what is used on the 250GDs, via the extra rod and bell crank, from this it's obvious that the travel or throw of the linkage needs to be greater, which it is on the 250 linkage, quite a bit. If you intend to mount the linkage on top of the manifold, as in the 606na set up, the 250 GD linkage won't work, it's not right for a direct connection to the other ball where it will have to go. You can see that this ball is a lot closer to the pivot, therefore the throw is a lot less, making the other linkage from a 606na (or others the same), the correct one to use.

Regards
Attachments
IMG_3952.JPG

tolley
Posts: 20

Re: 606 throttle linkage question

Post#28 » Sun Aug 20, 2023 10:31 am

did you have any problem getting full pump travel using the linkage , on mine im trying to use the 280ge pedal to w124 linkage on manifold ,but not getting full travel .
any help please

User avatar
vadimivanovich
Posts: 8643

Re: 606 throttle linkage question

Post#29 » Sun Aug 20, 2023 6:30 pm

You'll have to get more pull. The cleanest option is to use a W461 pedal & cable setup. PM me if you'd like a pedal/linkage assembly - I have a handful left
"The way you think is the way you live"

Return to “Tech: Diesel Engines and Conversions”

Who is online

Users browsing this forum: No registered users and 171 guests