Home   Forum   Classifieds   Tech/DIY   News   Articles   Chat   Contact Us

606 throttle linkage question

Forum rules
Welcome to the Tech/DIY information archive. This area of the board is for reference purposes, please direct general tech discussion to the G Wagen Technical Forum.
User avatar
inkblotz
Posts: 8202

Re: 606 throttle linkage question

Post#11 » Mon Sep 07, 2015 3:50 am

Here is a photo of my 603N/A linkage that I had on my 463 300GD before I did the 603A swap.

I may still have it laying around in my shop.
Mark
Attachments
Screen Shot 2015-09-07 at 7.59.33 AM.png
Linkage.JPG

sprinter 711651

Re: 606 throttle linkage question

Post#12 » Mon Sep 07, 2015 10:53 am

Marty, for your information, the 603 and 250GD linkages are the same, they are NOT connected directly to the back of the injector pump, they go via a 'bell crank' (item 733 in above post) and an extra rod. >unless you want the more aft mounting and extra rod, you need a linkage off a 606na (as in VIN I gave in 2nd post), or an E250na diesel (these probably weren't in the states)? These linkages mount further forward on the manifold, the rod connection is on the other (forward) side and they are connected directly to the fuel lever at the back of the injector pump. And, if you decide to use the 606na manifold on the turbo 606, the linkage will bolt straight on. Hope this helps.

User avatar
vadimivanovich
Posts: 8643

Re: 606 throttle linkage question

Post#13 » Mon Sep 07, 2015 5:51 pm

Okay, Sprinter has the first-hand experience so his word is golden. In any case, here are some pics of various throttle linkages that I've come accross, FYI:

1995 OM606 NA #1
Image
1995 OM606 NA #2
Image
1995 OM606 NA - TPS
Image
Cable type gas pedal for all OM60x
Image
Cable type gas pedal - pivot & cable connection post
Image
350GD throttle linkage (OM603a 3.5L) mounts to L side of block
Image
250GD Wolf throttle linkage sitting on top of an OM606a
Image
Image
OM602a Sedan linkage
Image
From firewall forward
Image
Back-side engine
Image
"The way you think is the way you live"

User avatar
inkblotz
Posts: 8202

Re: 606 throttle linkage question

Post#14 » Tue Sep 08, 2015 4:22 pm

Vadime
Your images did not show up.

User avatar
vadimivanovich
Posts: 8643

Re: 606 throttle linkage question

Post#15 » Tue Sep 08, 2015 4:53 pm

Ummm, really? I can see them on my iPad and two other PCs... Hmmm
"The way you think is the way you live"

User avatar
inkblotz
Posts: 8202

Re: 606 throttle linkage question

Post#16 » Tue Sep 08, 2015 4:58 pm

Can't see it on my iPhone or my Mac

User avatar
vadimivanovich
Posts: 8643

Re: 606 throttle linkage question

Post#17 » Tue Sep 08, 2015 5:06 pm

Mark, come to the light-side... PCs are your friend!
"The way you think is the way you live"

User avatar
AlanMcR
Posts: 7729

Re: 606 throttle linkage question

Post#18 » Tue Sep 08, 2015 6:58 pm

Not sure what happened, but I can't see them on my PC either.
...Alan

G Nome
Posts: 7766

Re: 606 throttle linkage question

Post#19 » Tue Sep 08, 2015 7:19 pm

I can't see them on my mac.

V noticed you are using a pad as well. Not completely PC eh?
Kent
If you need help...I usually have extra zip ties and duct tape.

User avatar
vadimivanovich
Posts: 8643

Re: 606 throttle linkage question

Post#20 » Tue Sep 08, 2015 7:59 pm

What the... I saw them at 6pm, and now I don't!

Niiiihiiiiilllll!!!

Kent, a happy wife is a happy life. Nothin' I can do about it
"The way you think is the way you live"

Return to “Tech: Diesel Engines and Conversions”

Who is online

Users browsing this forum: No registered users and 59 guests